Parameter Assignment / Addressing; Software Requirements - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Parameter assignment / addressing

6.1

Software requirements

SIMOTION SCOUT engineering system
The following SCOUT Version must be must be installed on your PG/PC for the commissioning
of the SIMOTION D4x5‑2:
● As of V4.2 for the SIMOTION D445‑2/D455‑2/CX32‑2
● As of V4.3 for the SIMOTION D425‑2/D435‑2/CBE30‑2
Please note the information on the latest
For information on how to install SIMOTION SCOUT on your PG/PC, see the
SIMOTION SCOUT Configuration Manual.
Note
The software configuration is described in this manual based on SIMOTION SCOUT and
SIMATIC STEP 7 Version V5.x.
Information of configuration of the SIMOTION D Control Units in the Engineering Framework
Totally Integrated Automation Portal (SCOUT in the TIA Portal), you will find in the configuration
manual
The TIA Portal requires at least SIMOTION SCOUT V4.4 and SIMOTION D4xx‑2 Control Units
as of firmware V4.3.
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION SCOUT TIA .
SIMOTION SCOUT DVD.
6
123