Installing
3.2 Installing the SIMOTION D4x5-2
Requirements
● The bushing for the cooling fins (external heat sink) has been fitted in the rear wall of the
control cabinet.
● Please ensure the area around the seal is both smooth and clean (
titled "Panel cutout").
● Seal available (for the article number, see the
parts and accessories )
Figure 3-4
40
Panel cutout
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
②
SIMOTION D4x5-2 Manual, Section Spare
please see figure
SIMOTION D4x5-2