Front Panel Configuration - VBrick 9000 Series Getting Started Manual

Front Panel Configuration

You can enable/disable the first two lines of the LCD display (Figure 6) with user-defined
text. You can also enable/disable the display of the host name and IP address. To enter your
own text or enable/disable these options, go to System Configuration > General in
VBAdmin and modify the fields explained below.
Display IP Address
Display Hostname
Display User Description Check to display the first two lines of user-defined text. Default
User Description 1
User Description 2
H.264 Encoding/Decoding Appliance Getting Started Guide
Check to display the appliance IPv4 address. Default = enabled.
Check to display the appliance host name. If host name is not
configured (on System Configuration > Network page) the
MAC address is used. Default = enabled.
= enabled.
Enter user-defined text (20 chars. max.) that will be displayed on
first line of LCD panel. Default =
Enter user-defined text (20 chars. max.) that will be displayed on
second line of LCD panel. Default (\r) =
Appliance Setup
VBrick Systems
Release x.x.x
17