Led Indicators; Edit Mode - VBrick 9000 Series Getting Started Manual

Encoding/decoding appliance
Hide thumbs Also See for 9000 Series:
Table of Contents

Advertisement

LED Indicators

The colored LEDs in the middle of the page give you a quick snapshot of the health and
status of the appliance. These indicators are dynamically refreshed every five seconds and
give you an up-to-the-minute snapshot of the current status. On a decoder appliance, you will
only see
Video Input
Encoder LEDS
Decoder LEDs
Video Input
Streaming
Alarms
Configuration

Edit Mode

In order to change configuration settings in the VBrick encoder, you must click
become the active editor so that multiple users cannot be changing parameters at the same
time. After clicking
is displayed on the front panel of the appliance. Only one user can be in Edit mode at
Progress
any time. Any user can end the current editing session of any other user regardless of login
level—admin or operator. As a best practice, you should click
changes and then click
Note All configuration screens have a
document are shown in
38
and
.
Alarms
Checks whether
Video State
Input page is running or not running.
• Green – Running.
• Red – Video Input problem.
Checks whether the
State
Transmitters page is transmitting or not transmitting. This includes any
configured transmitters or any server clients connected to the appliance.
• Green – at least one transmitter or server client is streaming.
• Yellow – no transmitters or server clients are streaming.
Checks whether the
System Traps
has any bad traps (for example a temperature alarm or a POST failure)
that were not cleared.
• Green – no alarms are present.
• Red – one or more alarms are present.
Checks for configuration errors or invalid input on any appliance
configuration pages.
• Green – no configuration errors are present.
• Yellow – one or more configuration errors are present.
, the button changes to
Edit
and
Save
Finish Edit
View
mode, that is after you have clicked the
Edit
on the Monitor > Encoder Status > Video
on the Monitor > Encoder Status >
on the Monitor > System Logs page
, and the message
Finish Edit
, make any necessary
Edit
to avoid interfering with other users.
mode and an
mode. All screens in this
Edit
© 2012 VBrick Systems, Inc.
to
Edit
Edit Session In
button.
Edit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents