Login Page; Home Page - VBrick 9000 Series Getting Started Manual

Login Page

Figure 13. Login Page
To login to VBAdmin:

1. Enter the IP address of the H.264 appliance in the address bar.
2. When the login page is displayed, login to VBAdmin with a valid user name and
password (case-sensitive), and then click the
password is
pages in VBAdmin to change the user name and password. The user name and password
cannot exceed 20 characters. It may include any combination of alphanumeric characters
and only the following special characters:
Table 18. Default Passwords and Privileges
User Level
Administrator admin
Operator
Diagnostics
Public

Home Page

The first time you launch VBAdmin you will need to page down and accept the End User
License Agreement before you can login. A successful login will then display the "Welcome
to VBAdmin" page shown below. This is the "home" page; it provides system information
and the colored LEDs in the middle of the page give you a quick snapshot of the health and
status of the appliance.
36
and . It is highly recommended that you use the
admin admin
Default User Name Default Password
admin
operator operator
diagnostics diagnostics
public public
button. The default user name and
Log In
~ ! # $ ^ * + & [ ] { } | < >
Privileges
Read, diagnostics, edit, change
passwords.
Read, diagnostics, edit.
Read, diagnostics.
Read.
© 2012 VBrick Systems, Inc.
Maintenance