Cmn Number; Ce Notice And Manufacturer's Declaration Of Conformity; Electromagnetic Emissions; Fcc Notice (Usa Only) - Silicon Graphics O2+ Hardware Reference Manual

Chapter 6: Safety and Regulatory Information
!

CMN Number

CE Notice and Manufacturer's Declaration of Conformity

Electromagnetic Emissions

FCC Notice (USA Only)

180
Caution: This product has several governmental and third-party approvals, licenses,
and permits. Do not modify this product in any way that is not expressly approved by
SGI. If you do, you may lose these approvals and your governmental agency authority
to operate this device.
The model number, or CMN number, for the O2+ workstation is on the system label
underneath the workstation.
The "CE" symbol indicates compliance of the device to directives of the European
Community. A "Declaration of Conformity" in accordance with the standards has been
made and is available from SGI upon request.
This section provides the contents of electromagnetic emissions notices from various
countries.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
007-4486-001