Programming Basics
Getting Started
Getting Started
This section explains the following basic operations. In this section, the HP BASIC
language is used for the examples.
•
"To Reset the Keysight E5260/E5270"
•
"To Read Query Response"
•
"To Perform Self-Test"
•
"To Perform Self-Calibration"
•
"To Perform Diagnostics"
•
"To Enable Source/Measurement Channels"
•
"To Select the Measurement Mode"
•
"To Force Voltage/Current"
•
"To Set the Integration Time"
•
"To Set the Measurement Range"
•
"To Pause Command Execution"
•
"To Start Measurement"
•
"To Force 0 V"
•
"To Disable Source/Measurement Channels"
•
"To Control ASU"
•
"To Read Error Code/Message"
•
"To Read Spot Measurement Data"
•
"To Read Sweep Measurement Data"
•
"To Read Time Stamp Data"
•
"To Perform High Speed Spot Measurement"
1- 4
Keysight E5260/E5270 Programming Guide, Edition 4