Table of Contents
Advertisement
Getting Started
Introduction
M9485A PXIe Startup Guide
1
Getting Started
Introduction
The M9485A PXIe vector Network Analyzer consists of M9300A (Frequency
Reference), M9309A (Synthesizer), M9389A (Source Output), M9340A
(Distributors), M9376A (VNA Receiver), M9377A (Direct Access Receiver) and
M9378A/B (Directional Coupler). M9389A includes M9309A and M9310A.
You may add as many receivers as you require and have n-port Network
Analyzers up to 24-ports, according to the number of receiver modules. Each
module can be controlled with the M9485A Soft Front Panel and remote
commands (IVI, SCPI). This allows you to make the network analyzer
measurement just as the n-port Network Analyzer.
The scope of this Startup Guide is to detail the processes of receiving and
installing the network analyzer module and cables that compose the Keysight
M9485A PXIe Vector Network Analyzer modules. Additionally, installing the
required software and verifying network analyzer module operation is
documented. If you have any questions after reviewing this information, please
contact your local Keysight Technologies Inc. representative or contact us
through our support Website at http://www.keysight.com/support.
Related Documentation
You can find all M9485A PXIe network analyzer module documentation and
other resources at:
or at the respective product pages on
Library > Manuals).
http://www.keysight.com/find/m9485A
www.keysight.com
5
(go to Document
Advertisement
Table of Contents
