Keysight Technologies E5260 Series Programming Manual page 64

NOTE
Remote Mode Functions
This chapter describes the functions of the Keysight E5260/E5270 in the remote
mode, and the initial settings.
• "Measurement Modes"
• "Synchronous Output"
• "Automatic abort Function"
• "Program Memory"
• "Digital I/O Port"
• "Trigger Function"
• "Initial Settings"
Synchronous Output
You can use synchronous output that will be synchronized to the output of the
primary sweep or search source. The output is available for the following
measurement modes:
• "Staircase Sweep Measurements"
• "Pulsed Sweep Measurements"
• "Staircase Sweep with Pulsed Bias Measurements"
• "Binary Search Measurements"
• "Linear Search Measurements"
The synchronous source supports the output mode (voltage or current) same as the
primary source, and does not support the pulsed output.
2- 2 Keysight E5260/E5270 Programming Guide, Edition 4