Table of Contents
Advertisement
Syntax
Parameters
Query Response
Example
Statement
WZ?
This query command immediately confirms the all channel output, and returns the
status 0 if it is within ±2 V or 1 if it is more than ±2 V.
WZ? [timeout]
timeout :
Timeout. Numeric expression.
0 to 655.35 sec, with 0.01 sec resolution.
With timeout parameter, this command waits until the all channel
output becomes within ±2 V or until the specified timeout elapses, and
returns 0 or 1.
The WZ? 0 command has the same effect as the WZ? command.
state<CR/LF^EOI>
0: All channel output is within ±2 V.
1: Any output channel applies more than ±2 V.
OUTPUT @E5270;"WZ? 5.0"
ENTER @E5270;A
Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
4- 149
Hide quick links:
Advertisement
Table of Contents
