Table of Contents
Advertisement
320
OUTPUT @E5270;"XE"
330
!
340
!E5270 starts measurement. Then E5270 sends negative gate
350
!trigger to the other instrument.
360
!Then the instrument should start measurement.
370
!
380
FOR I=1 TO Ib_num
390
ENTER @E5270 USING "#,3X,12D,X";Ic
400
PRINT "Ic= ";Ic*1000;" [mA]"
410
!
420
!Measurement data of the other instrument should be read.
430
!And the data should be displayed.
440
!
450
!The instrument must be set to the measurement ready and
460
!trigger wait condition.
470
!
480
!The instrument must send trigger to E5270. E5270 will
490
!start a step source output by the trigger, and perform
500
!a step measurement.
510
!
520
NEXT I
530
!
540
OUTPUT @E5270;"CL"
550
END
Line No.
320
Starts sweep measurement, and performs a step measurement.
When the Keysight E5260/E5270 starts a step measurement, it
sends a negative gate trigger. Then the other instrument should start
measurement.
390 to 400
Reads the measurement data, and displays the measurement data.
410 to 510
To synchronize the Keysight E5260/E5270 operation with the
operation of other instrument, add program lines to do following:
•
To read and display the data measured by the instrument
•
To set it to the measurement ready and trigger wait condition
•
To send a trigger from the instrument
When the Keysight E5260/E5270 receives the trigger, it starts a
step measurement and sends negative gate trigger.
520
Repeats 390 to 510 the number of times specified by Ib_num.
540
Disables the source/measurement channels.
Keysight E5260/E5270 Programming Guide, Edition 4
Programming Examples
Using Trigger Function
Description
3- 67
Hide quick links:
Advertisement
Table of Contents
