Keysight Technologies E5260 Series Programming Manual page 190

Command Reference
Command Summary
Category Command
Binary BSM
Search
BST
Measurement
Setup
BSVM
BSI
BSSI
BGV
BSV
BSSV
BGI
Linear Search LSTM
Measurement
LSVM
Setup
LSI
LSSI
LGV
LSV
LSSV
LGI
LSM
Measurement CMM
Setup
RI
RV
RM
Internal VAR
Variable
VAR?
4- 6
Sets the source output control mode and the automatic abort function.
Specifies the hold time and delay time.
Selects the data output mode.
Sets the current source channel.
Sets the synchronous current source channel.
Sets the voltage monitor channel.
Sets the voltage source channel.
Sets the synchronous voltage source channel.
Sets the current monitor channel.
Specifies the hold time and delay time.
Selects the data output mode.
Sets the current source channel.
Sets the synchronous current source channel.
Sets the voltage monitor channel.
Sets the voltage source channel.
Sets the synchronous voltage source channel.
Sets the current monitor channel.
Sets the automatic abort function.
Sets the SMU measurement operation mode.
Specifies the current measurement ranging mode for measurement other
than the high speed spot measurement that uses TI/TTI command.
Specifies the voltage measurement ranging mode for measurement other
than the high speed spot measurement that uses TV/TTV command.
Sets the range selection rule for the auto ranging current measurement.
Sets the value to the internal variable.
Returns the value set to the internal variable.
Keysight E5260/E5270 Programming Guide, Edition 4
Summary