Table of Contents
Advertisement
1
Getting Started
34134A AC/DC DMM Current Probe
The 34134A Current Probe measures low DC or AC from 10 mA to 50 A DC, 40 A
AC. This battery-powered clamp-on probe may be used with digital multimeters,
voltmeters, or other voltage-measuring instruments. The probe jaws clamp round
the conductor under test, allowing current measurements without breaking the
circuit. Hall sensor technology senses the magnetic field produced by the current
measured, and generates a millivolt DC or AC output signal. The narrow jaw is
designed for optimum use in crowded wiring in industrial and automotive
environments.
Compatibility
The 34134A Current Probe is compatible with any DMM, or other voltage
measuring instrument which has the following features:
– Range and resolution capable of displaying 1 mV of input.
– Voltmeter accuracy (uncertainty) of 0.75% or better to take full advantage of
– Minimum input impedance of 100 kΩ (1 V/A range) or 10 kΩ (10 mV/A range).
– Input jacks that accept 4mm shrouded banana plugs.
Figure 1-1
8
the accuracy of the probe.
Control and connector identification
Keysight 34134A User's Guide
Advertisement
Table of Contents
