Table of Contents
Advertisement
Syntax
Query Response
Example
Statements
*SRE?
The *SRE? query command returns information about which bits of the status byte
register are enabled for the SRQ (service requests), and stores the results in the
output data buffer (query buffer).
*SRE?
enabled_bits<CR/LF^EOI>
enabled_bits are represented by the corresponding decimal values shown below.
Decimal Value
1
2
4
8
16
32
64
128
For example, if Bit 0, 3, and 4 are enabled for the SRQ, 25 (1 + 8 + 16) will be
returned. If all bits, except for Bit 6, are masked, enabled_bits will be 0.
OUTPUT @E5270;"*SRE?"
ENTER @E5270;A
Keysight E5260/E5270 Programming Guide, Edition 4
Bit Number
Bit 0
Data Ready
Bit 1
Wait
Bit 2
not used
Bit 3
Interlock Open
Bit 4
Set Ready
Bit 5
Error
Bit 6
RQS
Bit 7
Shut Down
Command Reference
Command Reference
Description
4- 107
Hide quick links:
Advertisement
Table of Contents
