MUTOH ValueJet VJ-426UF Operation Manual page 38

Menu1: PF Micro Adjustment
With this menu item, you can alter the micro-adjustment value for the feed correction. The alteration will be valid for the current
printing only.
• See the following related sections of Panel Setting Menus (Chapter 2 below):
"**>3: PF Adjust" on page 55
[1]
Menu1 :
[2]
Micro :
Menu2: Backup
With this menu item, you can have a change that you made via "Menu1: PF Micro Adj. " reflected in the currently selected User
Types.
[1]
Menu2:
[2]
Update Parameter？
* Parameter Updating *
38 What you can do on the operation panel during printing
Press the [Enter] key to access the menu item.
PF Micro Adj.
• Use the [+] / [ - ] key to change the setting value.
5.00 %
• Press the [Enter] key to set the changed value.
Note
• The changed value set with this menu item will become invalid when the
printing ends.
• To have the change reflected in the currently selected User Type, save it
using "Menu2: Backup".
Press the [Enter] key.
Backup
Press the [Enter] key.
The setting value will be saved.