MUTOH ValueJet VJ-426UF Operation Manual page 63

Adv. 2: Pass Wait
Adv.2 :
Adv. 3: Head Travel
Adv.3 :
Adv. 4: Front Interlace
Adv.4 :
Adv. 5: BtmInterlace
Adv.5 : BtmInterlace
Set up the strike wait time while overwrite printing as well as regular printing.
Pass Wait
Setting values
Pass Wait :
Sets up the range that Print head moves while printing.
Head Travel
Setting values
Distance :
Distance :
Distance :
This menu is used to set media edge treatment menu.
FrtInterlace
Setting values
FrontInterlace :
Sets the BottomInterlace function.
Setting values
BottomInterlace :
<0.0 sec.> to 5.0 sec.
0.0sec
<> indicates the initial value.
Print head moves the range of the print
Data
data width.
The print head will travel the maximum
Machine
distance possible with the printer.
Print head shifts within the media width.
Media
This is the default setting.
<On> / Off
On
<> indicates the initial value.
<On> / Auto
On
<> indicates the initial value.
Set2: Advanced 63