Replacing Ink Cartridge - MUTOH ValueJet VJ-426UF Operation Manual

Replacing ink cartridge

When ink level becomes low, the error LED of the operation panel flashes and a buzzer sounds.
Printing pauses temporarily. It restarts after changed with a new ink cartridge.
Steps
[1]
[ 4 6 ] Ink End
Ink End
[2]
3 sec.
3 sec.
[3]
Important!
• Do not replace ink cartridge when the power of this product is OFF.
Ink level cannot be detected correctly.
• If ink cartridge is moved from cold to warm place, leave it at least three hours.
WARNING
Leave ink cartridges away from fire or high temperature objects.
It may cause fire.
Note
Sleep mode continues after stopping the buzzer.
Press the [Enter] key.
• The buzzer stops.
• In the picture on the left, the Slot 4 and 6 cartridges need replacing.
Make sure you shake the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that 10 times.
Note
x 10
When replacing varnish ink, you do not have to shake it.
Remove the empty ink cartridge and insert the new one.
slot 6
• Make sure to match the ink cartridge color with the label of this
Wh
product.
slot 6
Y
• The arrow should face up.
• Insert all the way to the end.

Replacing ink cartridge

85