How To Carry Out Initial Ink Charging After Ink Discharge - MUTOH ValueJet VJ-426UF Operation Manual

How to carry out initial ink charging after ink discharge

[1]
Press!
Option
1
[2]
Start Ink Charge
[3]
Empty WasteInk
[4]
Insert InkCartridges
[5]
3 sec.
3 sec.
[6]
Ink Charge
Set Media, then
press Set Media key.
108

How to carry out initial ink charging after ink discharge

1 2 3 4 5 6
Media Set
->E
->E
x 10
slot 1
K
slot 1
M
**%
Turn the power button of this product ON.
• Blue light becomes ON.
• The product starts initialization operations.
Press the "Enter" key when the message on the left appears.
When the message on the left appears, transfer the waste ink into a
container.
"Transfer the waste ink" on page 87
tank"
• Press the [Enter] key.
• The message on the left will appear.
Make sure you shake the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that 10 times.
Note
You do not have to shake varnish ink before use.
Insert ink cartridge to this product.
• Match the label of this product to the color of ink cartridge.
• The arrow should face up.
• Insert all the way to the end.
The message on the left will appear.
• This product starts ink charging.
When ink charging ends, the message on the left will appear.
under "Emptying waste ink