Setting Up Media - MUTOH ValueJet VJ-426UF Operation Manual

Setting up media

WARNING
Do not open or close the front cover if you are not in a balanced posture.
If you open or close it in an unbalanced posture, your hands or other body parts could get caught in it, possibly resulting in
serious injury.
1.
Placing the media on the table
[1]
Set Media, then
press Set Media key.
[2]
CAUTION
Always open the front cover fully.
If you leave it part-open, it could close suddenly.
Set media, then
close cover.
[3]
Check that the message on the left is displayed.
• If it is not, press the [Remove Media] key.
Open the front cover slowly, holding it by the places shown in the
picture and using both hands.
• Open the front cover fully up as far as it will go.
Check that the message on the left is displayed.
+ -
Note
+ -
• If the message on the left is displayed, you can use the [+] and [ - ] keys to
alter the adsorption fan's intensity.
• Use this when you want to alter the adsorption fan's intensity according to
the media's thickness.
• The adsorption fan will start operating when the [+] or [ -] key is pressed.
• If you alter the setting, it will be reflected in the currently selected User
Type.
Place the media on the table.

Setting up media

27