MUTOH ValueJet VJ-426UF Operation Manual page 105

2.
Repacking
WARNING
Do not open or close the front cover if you are not in a balanced posture.
If you open or close it in an unbalanced posture, your hands or other body parts could get caught in it, possibly resulting in
serious injury.
[1]
Remove all cables like power cable.
[2]
CAUTION
Always open the front cover fully.
If you leave it part-open, it could close suddenly.
[3]
× 1
[4]
× 8
Open the front cover slowly, holding it by the places shown in the
picture and using both hands.
• Open the front cover fully up as far as it will go.
Attach the head fixing plate with screws.
• Slide the head fixing plate leftward to attach it.
Note
Attach the head fixing plate carefully, so that it does not scratch any of the
surrounding parts.If they are scratched, the print quality could drop.
Install the two table fixing plates with the eight screws.
Transporting 105