5. Micro Change
PF5 :
**>4: Vacuum Fan
* * > 4 :
58
Set1: User Type
Use the [+] / [ - ] key to enter the micro adjustment value, and press the [Enter]
Micro Change
key.
Setting values
Micro :
Sets up vacuum fan operation. It has the role of fixing the media to the table.
Vacuum Fan
• If you are using a thin or delicate media and there is risk of it wrinkling due to
the fan, set a lower value for the fan.
Setting values
Vacuum Fan :
Vacuum Fan :
Vacuum Fan :
Vacuum Fan :
Vacuum Fan :
-5.00% to <0.00%> to 5.00%
5.00%
<> indicates the initial value.
<High>/Medium-Hi/ Medium/ Low/ Off
High
<> indicates the initial value.
Medium - Hi
Medium
Low
Off