Mnt.3: Uv Scan - MUTOH ValueJet VJ-426UF Operation Manual

Mnt.3: UV Scan

Mnt. 3 :
Note
The range over which the UV scanning is executed will depend on the current settings for "Size" and "Location" in the "MediaSetting" User
Type.
UV Scan1: Start
UV Scan1 :
UV Scan2: Scans
UV Scan2 :
UV Scan3: Post Cure
UV Scan3 :
74

Mnt.3: UV Scan

A function for executing just UV scanning.
UV Scan
Use this when you want to promote ink curing by applying the UV-LED light
additionally.
Submenus
UV Scan1 :
UV Scan2 :
UV Scan3 :
UV-LED light application is performed manually.
Start
When the media is not loaded, "No Media" is displayed, and the screen returns to
the previous screen.
• Application is canceled when the [Cancel] key is pressed for 2 seconds and
more while applying the UV-LED light.
Setting
UV Scan1 :
You can select the number of reciprocating motions for every 1 inch in the media
Scans
feeding direction while performing UV scanning.
• The settings here are reflected on "UV Scan1: Start" and "UV Scan3: Post Cure"
only.
Setting
UV Scans:
When it is set to "On", UV-LED light is additionally applied automatically even
Post Cure
time after printing.
Setting
Post Cure: Off
"UV Scan1: Start" on page 74
Start
"UV Scan2: Scans" on page 74
Scans
"UV Scan3: Post Cure" on page 74
Post Cure
Press the [Enter] key to start.
Start
2/<4>/8/12
4
The item in < > indicates the default
setting.
<Off>/On
The item in < > indicates the default
setting.