Introduction; Name Of Each Part - MUTOH ValueJet VJ-426UF Operation Manual

Introduction

1

Introduction

Name of each part

Printer's main body
UV-LED unit
Unit that shines the UV
(ultraviolet) light that
cures the ink.
Table
The media is printed on
this. Its height can be
altered by turning the PG
handwheel. It has an
adsorption fan inside.
Obstacle sensor
Sensor for making sure
the media does not
contact the print head.
8

Name of each part

Carriage
Contains the printer head,
and the LED pointer and
UV-LED unit.
Emergency stop button
Executes emergency stop
of the printer's operation.
LED pointer
Used for setting the
media placement set
position and the origin
pointposition.
Cartridge slots
Install an ink cartridge or
cleaning cartridge.
Network connector
Connect an Ethernet
cable.
Front cover
Open when mounting
media or during
maintenance.
PG handwheel
Turning the handwheel
inside here raises/lowers
the table.
Power connector
Operation panel
Operation panel P.9
Waste liquid tube
Waste ink is drained from
the tube.