MUTOH ValueJet VJ-426UF Operation Manual page 54

1. Confirm pattern
• Press the [Enter] key to carry out printing.
• Check the print results. If there are misalignments, proceed to rough adjustment pattern printing.
• In the picture below, there are misalignments.
Good Not Good
2. Rough adjustment pattern
• Press the [Enter] key to carry out printing.
• Look for and mark a number printed under a pattern that has least misalignment.
• "Pattern B: 6" or similar will appear in the display. Use the [+] / [ - ] key to enter in the display the number that you marked,
and press the [Enter] key.
• In the case of the picture below, enter "7", so that the display reads "Pattern B: 7".
8
3. Fine adjustment pattern
• Press the [Enter] key to carry out printing.
• Look for and mark a number printed under a pattern that has least misalignment.
• "Pattern B: 4" or similar will appear in the display. Use the [+] / [ - ] key to enter in the display the number that you marked,
and press the [Enter] key.
• In the case of the picture below, enter "6", so that the display reads "Pattern B: 6".
7
54 Set1: User Type
Not Good
7 6
11
6 5
10 9 8 7 6
7 6 5 4
B
Pattern name
Bi-dir
normal speed
medium drop family
5 4 3 2 1
B
Bi-dir
normal speed
medium drop family
3 2 1
Printing
settings
B
Bi-dir
normal speed
medium drop family