MUTOH ValueJet VJ-426UF Operation Manual page 60

** > 6: Low Speed
** > 6 : Low Speed
**>7: Show Edges
**>7:
**>8: User Copy
**> 8 :
60 Set1: User Type
Use this when you want a slower printing speed.
• Setting this when you are going to print onto a media with irregular surfaces
or level differences (such as a golf ball, ballpoint pen or smartphone case) will
enhance the image quality.
• If you set anything other than "Off" for this, the "Low speed" indicator will light
steady.
Setting values
Low Speed :
Low Speed : 50 %
Low Speed : 25 %
You can use the LED pointer to check the circumference of the print range and
Show Edges
the positions of the corners before printing.
"Checking the print range" on page 40
Setting values
Show Edges: Step
Show Edges: Auto
Show Edges: Off
This is for copying the currently selected User Type setting into another User
User Copy
Type.
• The items that will be copied are: "Print Mode", "Effect", the "Confirm Print" and
"PF Adjust" adjustment values, "Vacuum Fan", "MediaSetting", "Low Speed"
and "Show Edges".
Setting values
UserCopy : Type * * ->
UserCopy : Type * * ->
The printing speed will not be lowered.
Off
This is the default setting.
The printing speed will be lowered to
50%.
The printing speed will be lowered to
25%.
The LED pointer checks with the user at
the point on the four corners to show the
print range.
The LED pointer shows the print range
without checking with the user.
The print range is not checked.
This is the default setting.
Here you can select the User Type to copy
1
the settings into. If you select ALL, the
settings will be copied into all the User
Type.
ALL