MUTOH ValueJet VJ-426UF Operation Manual page 39

Menu3: Job Status
This menu item displays data on the job being printed.
• See the following related sections of Panel Setting Menus (Chapter 2 below):
"Status3: Job Status" on page 77
[1]
Menu3:
[2]
ToDoLength:
Done:
Remain:
Remain Time:
Note
• The values displayed by this function are approximate. They are not guaranteed to be rigorously accurate.
• If the print job data contains no length information, "0" will be displayed for all these items.
Menu4: Reset Waste Ink
Use this menu item to reset the waste ink counter to zero, if you empty out the waste ink tank during printing.
[1]
Menu4:
[2]
Initial. Parameter?
** Initializing **
Press the [Enter] key to access the menu item.
Job Status
Use the [+] / [ - ] key to select a menu item.
XXX.Xm
• ToDoLength: display this to check the total length (paper feed
direction) of the job being printed.
• Done: display this to check how much of the current job has been
XXX.Xm
printed.
• Remain: display this to check how much of the current job remains
XXX.Xm
to be printed.
• Remain time: displays the time remaining to complete the print job.
Xmin
Press the [Enter] key to access the menu item.
ResetWasteInk
Press the [Enter] key.
The counter will be reset to zero.
What you can do on the operation panel during printing 39