Menu5: Sleep Mode; Sleepmode1: Start; Sleepmode2: Settimer - MUTOH ValueJet VJ-426UF Operation Manual

Menu5: Sleep Mode

4

Menu5: Sleep Mode

SleepMode1: Start

SleepMode 1 :

SleepMode2: SetTimer

SleepMode 2 :
Important!
During Sleep Mode, even if the set amount of time has passed, print-head cleaning is not performed under the following
circumstances.
• Front cover is open.
• The waste fluid tank is full.
• There is little remaining ink in the ink cartridge (or no ink).
• The ink cartridge has been removed.
• The inserted ink cartridge is not the genuine ink cartridge, etc.
If one of the above conditions occurs during Head cleaning, cleaning is stopped.
When the printer returns to a normal state, Head cleaning is restarted.
78

SleepMode1: Start

Activate Sleep Mode.
Start
"Sleep Mode" on page 25
This is for setting the interval at which head cleaning will be carried out in the
SetTimer
sleep mode.
Setting values
CleaningTimer :
<Off>/ 1/2/3/4/5/6/9/12/18/24 hours
Off
<> indicates the initial value.
If you set an interval, the display will shift
to "SleepMode 1: Start".