Printing
1
Printing
Printing area
• Set the media size (width and length), media set position and origin position (print start position).
• Minimum margins from media paper set position to the origin position are 5 mm x 5 mm.
• The guide line indicates the maximum media size (483 x 329mm).
• Use the screw hole (M3) to attach your own jig.
• Printing is always started from Origin position (print start point).
See the figure below as example (setting: Landscape/Set the media horizontally).
Media width
Guide line
Origin position(X, Y)
Media set position(X, Y)
Screw hole
(M3)
Y-direction
(Printer Front side)
26
Printing area