MUTOH ValueJet VJ-426UF Operation Manual page 31

5.
Inputting the origin position
[1]
Origin ：
[2]
ORG
Moving Origin Pos.
[3]
ORG
Y
Ready to Print
Press the [Enter] key.
On
• This menu item will only appear if "On" is set for "Detailed-Set".
• If you select "Off" for this, the origin position set in the User Type will be
Press the [Enter] key.
X : 5.0 Y : 5.0
• If you know the media origin position in advance, you can input it here,
• For the origin position, any value from 5.0 to 270.0 for the X value, and any
• The table will move inward.
• The carriage will move to the set position, with its LED pointer lit
Use the keys to move the LED pointer to the origin position (print start
X : 15.0 Y : 40.0
point).
• Use the [+] / [ - ] key to move the table forward/backward
• Use the [<] / [>] key to move the LED pointer leftward/rightward
Press the [Enter] key to set the position.
X
0.0
• That completes setting of the media.
• You can now start printing by sending print data from the
Pressing and holding down the [Enter] key for 2 seconds or longer while
"Ready to Print" is displayed will bring up an inputting menu for the media
width, length, set position and origin position. Any values you input will be
reflected in the currently selected User Type.
Note
X = 5.0, Y = 5.0.
Note
using the [+] / [ - ] key to enter the X (longitudinal) value and [<] / [>] key to
enter the Y (lateral) value.
value from 5.0 to 453.0 for the Y value, can be entered.
*These ranges will vary depending on the values set for the media width
and length.
steady.
(longitudinally).
(laterally).
computer.
Note
Setting up media 31