MUTOH ValueJet VJ-426UF Operation Manual page 92

[3]
Mnt. 2 :
[4]
CR Mainte. :
CR Mainte. :
2.
Cleaning the cleaning wiper
WARNING
Do not open or close the front cover if you are not in a balanced posture.
If you open or close it in an unbalanced posture, your hands or other body parts could get caught in it, possibly resulting in
serious injury.
[1]
CAUTION
Always open the front cover fully.
If you leave it part-open, it could close suddenly.
[2]
92 Cleaning of cleaning wiper
• Press the [ - ] key several times, to bring up the display on the left.
CR Maintenance
• Press the [Enter] key.
Press the [Enter] key.
Start
• The carriage will move to the left side of the printer.
• The cleaning wiper will move upward.
The message on the left will appear.
End
Open the front cover slowly, holding it by the places shown in the
picture and using both hands.
• Open the front cover fully up as far as it will go.
Wipe the cleaning wiper with a cleaning stick.
• Wipe the left side surface of cleaning wiper going back and forth.
If it is hard to remove the stain, perform "Short" Head cleaning, and then
clean again.
Important!