MUTOH ValueJet VJ-426UF Operation Manual page 95

[3]
[4]
Do not touch the print head surface
[5]
CAUTION
When closing the front cover, always use both hands and hold it by the portions specified.
Do not place your fingers on the edges of the printer's opening portion, or on any parts around those edges. Your fingers could
get caught and be injured.
[6]
CR Mainte. :
CR Mainte. :
Print head circumference
Print head guide part
End
Start
Look at the bottom side of the carriage and check if dusts and ink
lump are adhered.
• Print head circumference (silver metal part)
• Print head guide part (black plastic part)
If dusts or ink lump are adhered, clean with a cleaning stick.
Important!
Do not touch the print head surface with fingers or a cleaning stick. It can
cause damage to the print head.
Close the front cover slowly, holding it by the places shown in the
picture and using both hands.
Press the [Enter] key.
• The message on the left will appear.
• That ends the procedure.
Cleaning of print head circumference 95