Wearing The Gloves And Goggles; How To Wear The Supplied Gloves - MUTOH ValueJet VJ-426UF Operation Manual

Wearing the gloves and goggles

3

Wearing the gloves and goggles

Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
Wear protective gloves, goggles and/or face shield, and clothing while using of the printer.
Especially when performing any of the following operations, be sure to wear the supplied gloves (or solvent resistant gloves)
and goggles.
• "Shaking ink cartridges" on page 82
• "Replacing ink cartridge" on page 85
• "Emptying waste ink tank" on page 86
• "Replacing absorption material for the flushing box" on page 100
• "Cleaning of cleaning wiper" on page 91
• "Cleaning of print head circumference" on page 94
• "Cleaning the circumference of the cap" on page 96

How to wear the supplied gloves

CAUTION
Do not touch UV curable ink with bare hands prior to ink curing.
• If glove becomes contaminated with ink, replace it with new.
• If protective clothing becomes contaminated with ink, immediately remove and wash for re-use.
• If ink gets on skin, immediately wash with soap and plenty of water for 15 minutes. Seek medical advice/attention
if irritation or inflammation are present.
• If ink gets in eyes, flush eyes with plenty of water for 15 minutes and seek medical advice/attention immediately.
• If swallowed, rinse mouth immediately and do not induce to vomiting. Seek medical advice/attention.
Wear the rubber gloves (white) over the plastic gloves (pink).

How to wear the supplied gloves

81