MUTOH ValueJet VJ-426UF Operation Manual page 68

Initial4: IP Address
Initial4 :
Initial5:Subnet Mask
Initial5 :
Initial6: Gateway
Initial6 :
68 Set3: Initial Settings
Sets the IP address of the printer.
IP Address
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on
to the next setting value.
• Confirm your input for each value.
Setting values
IP :
Sets the subnet mask of the printer.
Subnet Mask
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on
to the next setting value.
• Confirm your input for each value.
Setting values
MASK :
Sets the gateway.
Gateway
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on
to the next setting value.
• Confirm your input for each value.
Setting values
GW :
192. 168. 1. 253
255. 255. 255. 0
192. 168. 1. 254
0.0.0.0 to <192.168.1.253> to
255.255.255.255
<> indicates the initial value.
0.0.0.0 to <255.255.255.0> to
255.255.255.255
<> indicates the initial value.
0.0.0.0 to <192.168.1.254> to
255.255.255.255
<> indicates the initial value.