MUTOH ValueJet VJ-426UF Operation Manual page 101

[2]
Time to replace
[3]
CAUTION
When closing the front cover, always use both hands and hold it by the portions specified.
Do not place your fingers on the edges of the printer's opening portion, or on any parts around those edges. Your fingers could
get caught and be injured.
2.
Replacing steps
[1]
Put the printer into the CR maintenance mode.
"Putting the printer into the CR maintenance mode" on page 91
[2]
CAUTION
Always open the front cover fully.
If you leave it part-open, it could close suddenly.
• Check the absorption material for the flushing box.
• When there are lumps of ink rise from the frame of the flushing box,
it is time to replace.
Close the front cover slowly, holding it by the places shown in the
picture and using both hands.
under
Open the front cover slowly, holding it by the places shown in the
picture and using both hands.
• Open the front cover fully up as far as it will go.
Replacing absorption material for the flushing box
"Cleaning of cleaning wiper"
101