Checking The Print Range - MUTOH ValueJet VJ-426UF Operation Manual

Checking the print range

Once you have set this, you can check the print range by LED pointer before printing.
This is useful when you do not want to make a mistake, such as when printing on the media that you have only one of.
With this function, you can check the following:
• Whether or not the media position and the print range are misaligned
• Whether the print data is too big for the media
Operation
• Specify the four corners of the print range by the LED pointer.
• The LED pointer flashes (every second) on the point.
• The LED pointer lights up when moving from point to point.
• When the print data is too big for the media, the LED pointer flashes fast (twice a second) on the point.
• Move the LED pointer from the "position1" to "position4" in order in the following illustration.
Position3
Position2
Note
• Because of this product's structure, when the length (X direction length) of the print data is 270 mm and more, the LED pointer cannot
show the correct position. When this happens, the LED pointer flashes when moving from point to point.If the LED pointer is flashing
every second, the print data is within the set user-defined range.
• When the sent print data does not have the length information (X direction length), the LED pointer does not move from Position3 and 4.
40

Checking the print range

Media
Print range
(Front side of the table)
Position4
Position1
Y-direction