Chapter 2
[1]
2) Affix the Guide map label [1] inside the finisher front cover.
[1]
3) Affix the Staple label [1] inside the front cover.
[1]
4) Affix the LED lamp label [1].
2-28
F-2-102
F-2-103
F-2-104
[1]
5) Pull out the saddle unit [1].
6) Affix the Saddle return attention label [1].
7) Put the saddle unit back.
8) Close the front cover of the finisher.
2.6 Relocationg the Machine
2.6.1 A note on moving the machine
CAUTION:
If the machine is moved in connected condition, it will burden the part where
it is connected, and might cause damage or form changed. Hence be sure to
move it in dissemble condition.
F-2-105
[1]
F-2-106
[1]
F-2-107
0020-5992