Restoring The Sdcm Server; Manage Firmware Versions - Compaq StorageWorks SAN Director 64 Installation Manual

4–4 SAN Director 64 Installation Guide

Restoring the SDCM Server

Use these steps to restore the SDCM Server.
1. Print the readme.txt instructions provided on the SDCM Server Restore/Boot
CD-ROM.
2. Verify that the SDCM Server is powered off.
3. Insert the SDCM Server Restore/Boot CD-ROM in the CD-ROM drive and power on
the server.
4. Follow the printed readme.txt instructions.

Manage Firmware Versions

The SAN Director 64 internal operating code is downloaded from the SDCM Server and
stored on a CTP card. Up to eight versions can be stored on the SDCM Server hard drive
and made available for download to a director. Service personnel can perform the
following firmware management tasks:
Determine the firmware version active on a director.
Add to and maintain a library of up to eight firmware versions on the SDCM Server
hard drive.
Modify a firmware description stored on the SDCM Server hard drive.
Delete a firmware version from the SDCM Server hard drive.
Concurrently download a firmware version to a selected director.
CAUTION: The following the instructions deletes all data from all hard drive partitions.