Launching Ews From Network View; Figure 2-46: Network View, San Topology Screen - Compaq StorageWorks SAN Director 64 Installation Manual

2–70 SAN Director 64 Installation Guide

Launching EWS from Network View

Use these steps to access EWS from Network View.
1. At the SAN Topology screen, double-click the SAN Director 64 icon.
Figure 2–46: Network View, SAN Topology screen
2. Type your username and password at the Login. The default username is
Administrator. The default password is password.
3. To view SAN Director 64 properties, right click the SAN Director 64 icon, and select
Properties from the drop-down list. See
NOTE: The appearance and behavior of the window as shown in Figure 2-39 is based on the
device. The properties that are known to Network View, such as display names and device
types, are displayed. For each device, a different set of properties is displayed.
Figure 2–47.