Table 2-2: Director Operational States And Symbols - Compaq StorageWorks SAN Director 64 Installation Manual

2–40 SAN Director 64 Installation Guide
Operational—Director-to-server communication has been established, the
Director is operational, and no failures are indicated.
Degraded—Director-to-server communication has been established, but the
Director is operating in degraded mode and requires service. This condition is
typical if a port or redundant FRU fails. Go to step 3.
Failed—Director-to-server communication has been established, but the
Director failed and requires immediate service. Go to step 3.
Status Unknown—the Director status is unknown because of a network
communication failure between the Director and SDCM Server. Go to step 3.
3. Click the SAN Director 64 icon. The Hardware View for the selected Director
displays, see
and yellow diamonds, and Director degradation is indicated by the yellow triangle at
the alert panel.
4. Check Director status at the Hardware View and complete one of the following steps.
a. If the Director appears operational (no FRU alert symbols and a green circle at the
alert panel), go to the section, "Set Director Date and Time."
Table 2–2: Director Operational States and Symbols
Operational State
Figure 2–26. In the example, FRU failures are indicated by blinking red
Symbol