Figure 4-6: Send Firmware Confirmation Box - Compaq StorageWorks SAN Director 64 Installation Manual

4–10 SAN Director 64 Installation Guide
b. If required, install the correct version of the SDCM application. For instructions,
refer to the "Install or Upgrade Software" section in this chapter, and return here.
3. Click the icon representing the director to which the firmware version will be
downloaded. The Hardware View for the selected director displays.
4. As a precaution to preserve director configuration information, complete the data
collection procedure as follows.
a. At the SDCM Server, open the SDCM application. The Product View displays.
b. Click the icon representing the director for which the configuration file will be
backed up. The Hardware View for the selected director displays.
c. At the navigation control panel, select the Backup & Restore Configuration option
from the Maintenance icon. The Backup and Restore Configuration dialog box
displays.
d. Click Backup. When the backup process finishes, the Backup Complete dialog box
displays.
e. Click OK to close the dialog box and return to the Hardware View.
5. At the navigation control panel, select the Firmware Library option from the
Maintenance menu. The SD-64 Firmware Library dialog box displays, see
6. Select the firmware version to be downloaded and click Send. The send function
verifies existence of certain director conditions before the download process begins. If
an error occurs, a message displays indicating the problem must be fixed before
firmware is downloaded. Conditions that terminate the process include:
A redundant CTP card failure.
The firmware version is being installed to the director by another user.
The director-to-SDCM Server link is down.
If a problem occurs and a corresponding message displays, refer to the StorageWorks
SAN Director 64 Service Manual for specific information on isolating the problem. If
no error occurs, the Send Firmware confirmation box displays. See
Figure 4–6: Send Firmware confirmation box
7. Click Yes. The Send Firmware dialog box displays.
Figure 4–1.
Figure 4–6.