Figure 2-34: Configure E-Mail Dialog Box - Compaq StorageWorks SAN Director 64 Installation Manual

2–52 SAN Director 64 Installation Guide
2. Click the Maintenance icon at the navigation control panel and select Configure
E-Mail from the pop-up menu. The Configure E-Mail dialog box displays. See
Figure
Figure 2–34: Configure E-Mail dialog box
a. Type the IP address or DNS host name of the SMTP server in the SMTP Server
field. Use 64 or fewer alphanumeric characters.
b. For the E-Mail Addresses fields, type the e-mail addresses of up to five recipients
who should be informed of system events. Use 64 or fewer alphanumeric
characters for each entry.
3. To enable e-mail transmission of configured addresses, click the Enable E-Mail Event
Notification checkbox. A check mark appears in the box when transmission is enabled.
NOTE: Using SDCM, enable or disable Email Event notification for each director individually.
4. Click the Activate button to save the information and close the dialog box.
5. Click the SAN Director 64 icon. The Hardware View for the selected Director
displays.
6. At the Hardware View, click the Maintenance icon at the navigation control panel and
select Enable E-Mail Notification from the pop-up menu. A check mark appears in the
checkbox to indicate that e-mail notification for the Director is enabled.
2–34.