Configure Operating Parameters; Figure 3-6: Set The Director Offline - Compaq StorageWorks SAN Director 64 Installation Manual

Configure Operating Parameters

Use this procedure to configure the following operating parameters.
BB_Credit
R_A_TOV
E_D_TOV
Preferred Domain ID
Interop Mode
Switch Priority
Rerouting Delay
First, set the Director offline as follows.
1. At the View panel, select the Operations option at the left side of the panel. The
Operations panel opens with the Port Beaconing page displayed.
2. At the Operations panel, click the Online State tab, then click the Set Offline button.
The message "Your operations changes have been successfully activated" appears. See
Figure
Figure 3–6: Set the Director offline
3. Next, select the Configure option at the left side of the panel. The Configure panel
opens with the Ports page displayed.
3–6.
Using EWS to Configure the Director 3–7