Configure User Rights; Figure 3-11: Configure User Rights - Compaq StorageWorks SAN Director 64 Installation Manual

Configure User Rights

Use this procedure to configure the administrator-level and operator-level passwords used
to access EWS through the Username and Password Required dialog box.
1. At the Configure panel, click the User Rights tab. The User Rights page displays. See
Figure
Figure 3–11: Configure User Rights
2. For the Administrator set of data fields:
a. Type the administrator user name (as specified by the customer's network
administrator) in the New User Name field. Use 16 or fewer alphanumeric
characters.
b. Type the administrator password (as specified by the customer's network
administrator) in the New Password field. Use 16 or fewer alphanumeric
characters.
c. Type the administrator password again in the Confirm New Password field.
3–11.
Using EWS to Configure the Director 3–13