Table of Contents
Advertisement
2–6
SAN Director 64 Installation Guide
Number
1
2
3
4
5
6
7
8
9
10
11
12
Table 2–1: Shipping Carton Contents
One SAN Director 64 Product CD containing firmware, license,
documentation
SAN Director 64 Installation Guide, SAN Director 64 Release Notes
Two Power Distribution Unit (PDU) power cords
Two standard AC power cords
Four multimode, short-wave loopback plugs
One torque driver with integrated 5/32" bit
One 10-foot null modem cable
Compaq 9000 Series Rack Mount Kit containing:
Two front mounting brackets
Two rear mounting plates
Two rear angle brackets
Two shelf brackets
Pouch containing Compaq 9000 Series Rack Mount hardware:
Eight 10-32 x 0.375 in. Phillips panhead screws—Installs two shelf
brackets to rails.
Six 10-32 x 0.375 in. Phillips panhead screws—Installs two front
mounting brackets to rails.
Four 10-32 X 0.25 in. Phillips countersunk screws—Installs front
brackets to switch.
Ten 10-32 cage nuts—Secures front and rear shelf brackets.
Four 0-32 x 0.375 in. Phillips panhead screws—Installs rear bracket
sections.
Four 10-32 X 0.25 in. Phillips countersunk screws—Installs rear
mounting plates to chassis.
Four 10-32 X 0.375 in. Phillips panhead screws—Installs two rear angle
brackets.
Eight square alignment washers
One cable management assembly
Compaq SAN Director 64
Item
Advertisement
Table of Contents
