Figure 2-12: Positioning The Server Shelf Kit In The Rack - Compaq StorageWorks SAN Director 64 Installation Manual

d. From the front of the rack, move the server shelf kit forward into the rack.
Figure 2–12: Positioning the server shelf kit in the rack
e. Loosely attach the server shelf kit to the front of the rack using the four screws
provided.
5. Reinstall the two rail extensions as follows. See
a. Slide the top tray forward.
b. Insert one rail extension (to where it was previously installed) between the bottom
tray bracket and the slide rail. The slide rail attaches to the bottom shelf.
c. Adjust the the rail extension to the appropriate length, depending on the depth of
the rack.
NOTE: For example, the Compaq 9000 Series rack requires a longer rail extension. The Compaq
M-Series rack requires a shorter rail extension.
Installing and Configuring the SAN Director 64
Figure 2–11.
2–25