2–56
SAN Director 64 Installation Guide
Procedures
Use the following procedures to create a new threshold alert, or to modify, activate,
deactivate, or delete an alert.
Create New Alerts
1. At the Hardware View for the selected SAN Director 64, select Threshold Alerts from
the Configure menu.
The Configure Threshold Alerts dialog box displays, see
Figure 2–36: Configure Threshold Alerts dialog box
NOTE: If alerts are configured, they will display in table format showing the name of the alert,
type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).
2. Click New.
Figure
2–36.