Compaq StorageWorks SAN Director 64 Installation Manual page 62

2–38 SAN Director 64 Installation Guide
b. Password—Click in this field and type a password up to 16 alphanumeric
characters in length. Control characters and spaces are not valid. The password is
case-sensitive.
c. Confirm Password—To confirm that the password is entered correctly, click in this
field and enter the password exactly as in the Password field. If an incorrect
keystroke is entered, use the Backspace key to delete individual letters or select
(highlight) the entire entry and use the Delete key.
d. Description—Optional. Type a user description, such as location, department,
function, or other information. Enter a description of 64 or fewer characters.
Control characters and spaces are not valid.
e. Rights Granted/Rights Available—Lists all rights categories granted to a user. For
a new user, only View displays in the Rights Granted field. The Rights Available
field lists all rights categories not granted to a user.
7. To grant rights, select a category in the Rights Available field and click Add.
8. To remove rights, select a category in the Rights Granted field, then click Remove.
Since the View option is granted to all users, it cannot be removed from the Rights
Granted field.
NOTE: For a description of rights categories available for users, refer to Chapter 5 of the
Compaq SANworks Director Connectivity Manager User Guide
9. Click OK to accept the information.
10. Repeat step 4 through step 6 as required to assign multiple user names and passwords.
11. When finished, click Close.
.