Add A Firmware Version - Compaq StorageWorks SAN Director 64 Installation Manual

4–6 SAN Director 64 Installation Guide

Add a Firmware Version

The firmware version shipped with the director is provided on the SAN Director 64
Documentation Kit CD. Subsequent firmware versions to upgrade the director are
provided to customers through Compaq's website.
NOTE: When adding a firmware version, follow procedural information in the Release Notes that
accompany the firmware version. This information supplements information provided in this
general procedure.
Use these steps to add a director firmware version to the library stored on the SDCM
Server hard drive.
1. Obtain the new firmware version from the Compaq website.
NOTE: The following path is subject to change.
a. At the SDCM Server or other personal computer (PC) with Internet access, open
the Compaq website. The uniform resource locator (URL) is
www.compaq.com/products/storageworks/director .
b. Click on Firmware Downloads in left panel.
c. Click the SD-64 Firmware Version XX.YY.ZZ entry, where XX.YY.ZZ is the
desired version. The Windows NT Save As dialog box appears.
d. Verify that the correct directory path is specified at the Save in field and the correct
file is specified in the File name field. Click Save. The new firmware version is
downloaded and saved to the SDCM Server or PC hard drive.
e. If the new firmware version was downloaded to a PC (not the SDCM Server),
transfer the firmware version file to the SDCM Server by Zip disk, CD-ROM, or
other electronic means.
2. At the SDCM Server, open the SDCM application. The Product View displays.
3. Click the icon representing the director to which the firmware version will be added.
The Hardware View for the selected director displays.
4. At the navigation control panel, select Firmware Library from the Maintenance icon.
The SD-64 Firmware Library dialog box displays. See Figure 4–1.