Table of Contents
Advertisement
3–6
SAN Director 64 Installation Guide
Configure Date and Time
Use this procedure to configure the director date and time.
1. At the Configure panel, click the Director tab, then select the Date/Time option. The
Director page displays with Date/Time selected. See
Figure 3–5: Configure Director, Date/Time
a. Click the Date fields that require change. Type changes using the following ranges:
b. Click the Time fields that require change. Type changes in the following ranges:
2. Click the Activate button to save the information. The message "Your changes to the
date/time configuration have been successfully activated" appears.
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YYYY): greater than 1980
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
Figure
3–5.
Advertisement
Table of Contents
