Configure Director Ports; Figure 3-2: View Panel - Compaq StorageWorks SAN Director 64 Installation Manual

5. Click OK. EWS opens showing the View panel. See
Figure 3–2: View panel

Configure Director Ports

Use this procedure to configure the names and settings for Director Fibre Channel ports.
1. At the View panel, select the Configure option at the left side of the panel. The
Configure panel opens with the Ports page displayed as shown in
vertical scroll bar as necessary to display additional port information rows (up to 64
ports).
a. For each port, type a port name of 24 or fewer alphanumeric characters in the
associated Name field. The port name should identify the device to which the port
is attached.
Using EWS to Configure the Director
Figure 3–2.
Figure
3–3
3–3. Use the